color | blue,mark |
fiber | Aramid/inorganic fiber |
Adhesive material | Neoprene rubber(CR) |
Suitable fluid medium | Saturated steam, oil, water, dilute acid, refrigerant |
density | 1.7g/cm³(106lbs/ft³) |
Tensile strength,ASTM F 152 | 1500psi(12.4Mpa) |
compressibility,ASTM F 36 | 8-16% |
Rebound rate,ASTM F 36 | 45% |
Applicable temperature range | -100~700℉(-73~371℃) |
Continuous, highest | 548℉(287℃) |
Fluid PH range (room temperature) | 3-11 |
pressure,max | 1500psig(103bar) |
Fluid permeability resistance-ASTM F 146 | |
IRM 903 oil,5h/300℉/149℃ | |
thickness increase | 10-15% |
weight increase | 20%MAX |
ASTM fuel B 5h/70℉/21℃ | |
thickness increase | 5-20% |
weight increase | 20% |
ASTM F37(FUEL A) | 0.03mL/hr |
ASTM F37(Ammonia gas) | 0.7mL/hr |
Volume resistivity,ASTM D257 | 5×10^13 ohm-cm |
Insulation breakdown voltage,ASTM D 149 | 11.7KV/mm(297V/mil) |
DIN 3535 Gas permeability | 0.05cc/min |
Creep relaxation rate,ASTM F 38 | 20% |
flexibility,ASTM F 147 | 8x |
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.