Nonmetal sheet 8700

Name: Nonmetal sheet 8700
Brand: GETM
Availability: InStock
Rating: 4.7 (28 reviews)

It is a high performance gasket material for processes requiring neoprene rubber (CR) as a cement, such as freezing processes.The gasket material is highly resistant to ozone, oils, non-aromatic solvents and a variety of refrigerants.

Product Details

Parameter

Inquiry

Nonmetal sheet 8700
Advantage：
1、our best fit for wine style HVAC OEM applications
2、A tight seal can be achieved in the combustion of refrigerant oil
composition：
Containing high strength aramid and inorganic fiber, its cement is high quality neoprene rubber.
Adhesion resistance：
Extensive work has been done to develop excellent bond release properties, as demonstrated by the MIL-G-24696B 366℉/48hrs naval facility adhesion test.
Note：ASTM standard performance is measured on 1/16 inch plate thickness, but ASTM F 38 is measured on 1/32 inch plate thickness. These properties are for general reference only and cannot be used as a basis for acceptance or rejection. The data listed in this table are within the normal range of product performance and should not be used to prepare technical specifications or solely as a basis for design.
When the nominal pressure is above class300, please consult the representative office.

colour	blue
fibre	Aramid/inorganic fiber
Adhesive material	chloroprene rubber（CR）
Suitable fluid medium	Saturated steam, oil, water, dilute acid, refrigerant
density	1.7g/cm³（106lbs/ft³）
Tensile strength，ASTM F 152	1500psi（12.4Mpa）
compressibility，ASTM F 36	8-16%
Rebound rate，ASTM F 36	45%
Applicable temperature range	-100~700℉（-73~371℃）
Continuous maximum	548℉（287℃）
Fluid permeates the lunar calendar-ASTM F 146
IRM 903 oil，5h/300℉/149℃
Thickness increase	10-15%
Weight gain	20%max
ASTM fuel B 5 h/70℉/21℃
Thickness increase	5-20%
weight gain	20%
ASTM F 37(FUEL A)	0.03ML/hr
ASTM F 37(Ammonia gas）	0.7mL/hr
Volume resistivity，ASTM D257	5×10^13 ohm-cm
Insulation breakdown resistance，ASTM D 149	11.7KV/mm（297V/mil）
DIN 3535 Gas permeability	0.05cc/min
Creep relaxation rate ASTM F 38	20%
flexibility，ASTM F 147	8x
Fluid PH range (room temperature)	3-11
Pressure, maximum	1500psig（103bar）

* From

* Message

Tips on getting accurate quotes from suppliers. Please include the following in your inquiry:
1. Personal or business information
2. Provide product request in great detail
3. Inquiry for MOQ, Unit Price, etc

Company

*Full Name

*Telephone

Fax

Website

Country

* Verification Code

Please enter a correct verification code.

Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.